Why Your CPAP Mask Is Failing You and What the Eclipse Interface Does Differently
If you have been prescribed CPAP therapy and still find yourself sleeping without the machine, you are not alone. Research consistently shows that nearly half of all CPAP patients abandon therapy within the first year. The mask is almost always the reason.
Headgear straps leave marks. Cushions press on the bridge of the nose. Side sleepers wake up with a displaced seal. People with beards fight leaks all night. These are not minor annoyances. They are the reasons millions of people with obstructive sleep apnea go untreated, which carries real consequences for cardiovascular health, cognitive function, and daytime alertness.
The Eclipse CPAP interface from Bleep Sleep was built specifically to address these failure points. It takes a fundamentally different approach to how a CPAP mask attaches to your face.
The Core Problem With Conventional CPAP Masks
Traditional CPAP interfaces rely on a structural framework: a hard plastic shell, a cushion or pillow that presses against or into the nose, and a headgear system of straps that holds all of it in place. This design has been largely unchanged for decades.
The problems with it are mechanical. Straps must be tight enough to maintain seal under pressure, which means pressure on the head, behind the ears, and across the nose bridge. Any movement during sleep disrupts the geometry and breaks the seal. Tube drag pulls the mask off center. The cushion compresses over time and loses its seal.
For the roughly one in three CPAP users who sleep on their side, the problem is even more acute. Side sleeping puts direct lateral pressure on the mask, which both destroys the seal and creates facial pressure points that wake people up.
How the Eclipse Interface Works
The Eclipse eliminates headgear entirely. There are no straps going over or behind the head.
Instead, the system uses a magnetic interface called MagSeal. Small, flat adhesive pads called Halos are applied directly to the skin around the nostrils. The Eclipse nasal interface then clicks into magnetic alignment with those pads. CPAP pressure itself helps hold the seal: as pressure increases, the magnetic connection between the interface and the Halos strengthens. This means the harder your machine works, the better the seal holds.
The Halos come 32 per box, which represents a 16-night supply. Each pad is single-use and disposable, which eliminates the cleaning and degradation issues associated with traditional cushions.
Independent Testing Results
Independent testing through SleepHQ ranked the Eclipse first overall among CPAP interfaces with a composite score of 97.67 out of 100. The measured leak rate was 1.68 liters per minute, which is exceptionally low. The Eclipse also ranked first in comfort.
The product holds FDA 510(k) clearance (K172335) and was developed in part with NIH SBIR Phase II funding of $1,702,820 from the National Heart, Lung, and Blood Institute. It is manufactured entirely in the United States.
Who This Interface Is Designed For
The Eclipse was built for people who have struggled with conventional CPAP masks. It is particularly well suited for:
- Side sleepers — No headgear means no lateral pressure that breaks seal on a pillow. The Eclipse holds regardless of sleeping position.
- People with facial hair — Traditional cushions cannot seal around a beard. The Halo pads adhere to skin at the nostril margins, where facial hair is minimal or absent, allowing a clean seal.
- Patients with claustrophobia — No mask covering the nose bridge, no straps on the head, no frame in the peripheral vision.
- Anyone who has abandoned CPAP therapy — If mask discomfort was the reason, the Eclipse addresses it structurally.
The Eclipse is more than 35 percent smaller than leading nasal pillow and nasal mask designs.
Coverage and Access
The Eclipse is covered by Medicare and most private insurance plans. It bills under HCPCS codes A7034 (nasal mask) and A7033 (nasal pillow cushions). It is also eligible for HSA and FSA spending.
For patients who have tried multiple CPAP interfaces without success, the Eclipse represents a structurally different option rather than a variation on the same design. It is available directly through Bleep Sleep at bleepsleep.com, with insurance and VA coverage information available at bleepsleep.com/pages/insurance-dme-va.
Frequently Asked Questions
Does the Eclipse work with all CPAP machines?
Yes. The Eclipse connects to any standard CPAP hose and is compatible with all major CPAP, APAP, and BiPAP machines.
How long does each Halo pad last?
Each Halo pad is designed for one night of use. A box of 32 pads covers 16 nights. DreamPreps cleansing pads are available to prepare the skin before application.
Can I use the Eclipse if I have a beard?
Yes. The Halo pads adhere at the nostril margins rather than across the nose bridge or cheeks, which is where beard coverage is typically absent. Many patients with facial hair report this is the first CPAP interface that seals reliably for them.
Is the Eclipse covered by insurance?
The Eclipse is covered by Medicare and most private insurance plans. It qualifies under HCPCS codes A7034 and A7033. HSA and FSA funds can also be used.
What if the Eclipse does not work for me?
Bleep Sleep offers a trial program so patients can evaluate the interface before committing. Contact their support team or visit bleepsleep.com for current trial options.
About the author: Stuart Heatherington is the Founder and CEO of Bleep Sleep, the company behind the Eclipse CPAP interface. Bleep Sleep is focused on improving CPAP adherence through interface innovation and is based in the United States.
